A small wood lathe can be used for making pens, rings and other small projects. However, it’s not recommended for large works like table legs and bowls.
Safety is an important factor when using a lathe, so it’s best to wear safety goggles and a face shield to avoid inhaling sawdust. Also, don’t let loose clothing or jewelry get caught in the spindle.
Variable speed control
Variable speed control is an important feature for small wood lathes. It allows you to adjust the motor’s speed to suit your workpiece size, diameter, and hardness.
This is especially helpful when you are turning bowl blanks, as the motor can be lowered to accommodate smaller-diameter pieces. In addition, the motor can be increased to provide the needed torque for larger-diameter and out of balance workpieces.
The JET 1221VS was designed to provide you with the ultimate control while turning. It offers a wide range of features that make your turning experience more enjoyable than ever before.
The lathe features cast iron construction, digital RPM readout, forward and reverse operation, patent-pending belt tension system, 24 indexable positions, vibration free operation, optional bed extension and more. It also includes a 1 hp electronic variable speed motor that operates on 115v.
Tool rest
The tool rest on your small wood lathe provides a solid, yet adjustable support for turning chisels. It also helps make smooth, consistent depth cuts when rounding or sizing a piece of stock.
The most important surface on a tool rest is the top edge, where you must regularly inspect and maintain it to prevent nicks and scratches from developing. These nicks can create hesitations in the movement of a turning chisel, which may result in unwanted changes in cut depth.
A fine machinists file can be used to smooth out the surface of the tool rest. Start with rocking strokes, following the curved surface from the front face to the rear edge.
A rounded rest is much more user-friendly for the hands. After a short period of time, the tool rest will be nick-free and ready for use.
Safety guard
A safety guard for a small wood lathe protects against flying chips, sparks, dust and more. The guard mounts to a bracket on the headstock and flips out of the way when not in use.
A machine guard is an eminently practical piece of safety equipment that encloses dangerous machinery parts and prevents contact between employees and those components. Machine safeguarding devices should be designed and installed by qualified technical professionals.
The best way to minimize hazards on a lathe is to keep the machine running at slow speeds and avoid contacting the rotating parts. Also, ensure the workpiece is securely held before turning it on.
The most significant hazard on a wood lathe is contact with the rotating parts or when an operator reaches into the work area to adjust a component while the lathe is running. This is particularly true for hand-fed lathes, which require the operator to move the workpiece around with a single-point tool.
Dust collection
Dust is an issue with any woodworking tool, but it’s especially problematic on a lathe because the chips are flying off your work and hitting you in the face. Keeping your shop free of dust is important for your health and safety, but it can be difficult to find a system that will collect the vast majority of the waste.
A broom or vacuum cleaner can be a low cost way to get rid of lathe dust, but these are inconvenient and can lead to eye and breathing irritation. A powered respirator, on the other hand, is an excellent safety measure and can protect your lungs and eye from dust and other contaminants.
The most effective method of collecting dust from a lathe is to install a collection hood. These can be up to 40 inches (101 cm) wide and need a powerful suction device to draw the air through it, usually in the form of a cyclone fan.